With single-point addressable smoke detectors, facility owners and emergency responders instantly know the exact trouble location in an alarm situation. Once on scene, responders don’t waste valuable time searching for the location of the fire.
System Sensor Smoke Detector
The addressable photoelectric smoke detectors are faster-installing devices that significantly improve the ability of fire and emergency resources to respond effectively when there’s an alarm. The faster the response, the greater safety for building occupants and reduced damage to the building and its contents.
Single-Point Addressable Technology
A factory-mounted, addressable singlepoint zone expander is integrated into the base of the smoke detector. Because each detector reports individually to the panel, trouble reports are identified to a specific detector, speeding repair. No need to replace the heads on a string of detectors or individually test each detector to pinpoint the source of the problem.
In an alarm situation, facility owners and first responders instantly know the exact location of the alarm, enabling a faster response. For any installation that includes multiple rooms or areas, addressable technology offers many benefits.
Fixed Temperature Thermal Detector
The 2WT-BLX features a restorable, built-in, fixed temperature thermal detector and is capable of sensing a temperature higher than 135° F. If the detector senses a higher temperature than 135°, the red LED latches on, and an alarm condition is sent to the control panel.
Built-In Drift Compensation
As detectors age and accumulate contaminants or as their environment changes, false alarms become more common. With drift compensation, the detector automatically adjusts to maintain the UL-acceptable operating range. Smoothing algorithms compensate for these changes, reducing nuisance alarms.
LED STATUS LIGHTS
Wide-angle, dual-color LEDs provide at-a-glance status indications. After power-up has completed and the detector is functioning normally, the green LED blinks once every five seconds. If the detector needs maintenance because its sensitivity has shifted outside the limits, the red LED blinks once every five seconds.
Tamper Resistant
The detectors include a tamper-resistant feature that prevents removal from the mounting base without the use of a tool.
